Saturday, September 21, 2013
Friday, August 23, 2013
music & the sea
I've had some more adventures in painting lately, and thought I'd share two. Both pieces were a mess when I found them, which meant they were crying out for a new life with a new finish!
First, this side table had a roughed up top and a weird decal paint thing of old flowers on a not-so-nice brown finish. To hide the top's flaws, I decoupaged vintage music sheets on top after I painted the whole thing white. I added a little stenciling to the corners for fun & finished with a matte finish wipe on poly.
This dresser was just a boring brown with broken & missing handles. I recently saw a photo of a nautical dresser redo, and was inspired! The main paint was a pretty aqua, but as I was working I decided I wanted to come up with a sea salt sprayed effect...
Sea Salt/Seaspray paint effect: I mixed a couple of tablespoons of white flat paint with about 3x as much water, making a very watery mixture. I brushed it on in random strokes, then immediately rubbed it off with an old rag. I experimented a little, and found I liked adding it heaviest around the edges, and also did a second time just in small spots to add a variegated effect.
I also drilled the holes for the handles to be larger. Then I threaded through 1/2" jute rope tying knots in front & back of the holes to create seaside inspired handles. It took 21" of rope per handle, in case you want to try this yourself sometime.
What do you think - does it remind you of the seaside?
First, this side table had a roughed up top and a weird decal paint thing of old flowers on a not-so-nice brown finish. To hide the top's flaws, I decoupaged vintage music sheets on top after I painted the whole thing white. I added a little stenciling to the corners for fun & finished with a matte finish wipe on poly.
This dresser was just a boring brown with broken & missing handles. I recently saw a photo of a nautical dresser redo, and was inspired! The main paint was a pretty aqua, but as I was working I decided I wanted to come up with a sea salt sprayed effect...
Sea Salt/Seaspray paint effect: I mixed a couple of tablespoons of white flat paint with about 3x as much water, making a very watery mixture. I brushed it on in random strokes, then immediately rubbed it off with an old rag. I experimented a little, and found I liked adding it heaviest around the edges, and also did a second time just in small spots to add a variegated effect.
I also drilled the holes for the handles to be larger. Then I threaded through 1/2" jute rope tying knots in front & back of the holes to create seaside inspired handles. It took 21" of rope per handle, in case you want to try this yourself sometime.
What do you think - does it remind you of the seaside?
Wednesday, August 7, 2013
Grey Dresser
I just finished a dresser for my booth that I wanted to share. Some pieces are easy, get finished quickly, and I move on. Some pieces are a labor of love, sweat & tears, and this was one of those!
It looks so unassuming, right?
One of the drawers was missing, so I replaced the top slot with a board to create a shelf, which now holds a basket.
I moved the drawer rail from the top slot to the bottom slot (which was missing the rail), so the drawer down there had support.
The drawer pulls were ugly brass, so I primed & spray painted them an ivory color.
Then the painting of the dresser itself. I tried making my own chalk paint. Wow. Crazy. This is not as easy as Pinterest makes it seem, hahaha! I had to sand the first coat I tried completely off, resand the whole dresser, add primer, and then paint it again. Heavy sanding was required between coats. And that paint is gloppy. Good gracious - I am not sure if I will do this again or not! Maybe the Texas heat was getting to me, but I have no idea why people love this stuff so much.
And finally, some heavy distressing to make it fun...
I am happy with the final product, it is exactly how I envisioned it! It just took soooo much work to get there!
It looks so unassuming, right?
One of the drawers was missing, so I replaced the top slot with a board to create a shelf, which now holds a basket.
I moved the drawer rail from the top slot to the bottom slot (which was missing the rail), so the drawer down there had support.
The drawer pulls were ugly brass, so I primed & spray painted them an ivory color.
Then the painting of the dresser itself. I tried making my own chalk paint. Wow. Crazy. This is not as easy as Pinterest makes it seem, hahaha! I had to sand the first coat I tried completely off, resand the whole dresser, add primer, and then paint it again. Heavy sanding was required between coats. And that paint is gloppy. Good gracious - I am not sure if I will do this again or not! Maybe the Texas heat was getting to me, but I have no idea why people love this stuff so much.
And finally, some heavy distressing to make it fun...
I am happy with the final product, it is exactly how I envisioned it! It just took soooo much work to get there!
Monday, July 15, 2013
Counter Height Work Table Project
As I shared in my last post, part of my huge school/craft room redo was creating a counter height work table.
I already had a "Liatorp" pedestal table from Ikea. It was about 8 years old, so the top was badly scratched, dinged & messed up - it stressed me out every time I looked at it because I wasn't sure how to fix the top.
A table with storage sounded good, as did keeping the round shape. I was inspired by this photo I found on Pinterest:

I guess what I did is called an Ikea hack by some. I call it a cheap way to get what I want by using what I already had. Here's the before of the room & the table...
And after...
The building of the new table was a challenge for me, my first attempt at building a real piece of furniture. My husband helped me a lot, and we finished in about 2 hours.
I used 4x4 wood for the legs, which rested almost perfectly on the box that is built under the "Liatorp" table top for holding the table leaf. The legs are cut at 34" tall to create the counter height for the new table. We attached the legs to the "Liatorp" leaf box with flat metal screw plates. Chad also routered a rounded edge onto the outside edge of each leg.
I used 2x2 wood for the shelf supports, and a countersink drill bit so the screws would be hidden below the surface once I finished it. I filled the screw holes with Plastic Wood.
I used the side pieces of the "Billy" bookcase I took apart for another project for this room redo. The side pieces were the same white shade as the "Liatorp" table, so this worked out well. I cut them to length and then cut out the corners for them to fit around the legs. I learned to cut laminated MDF boards on the bottom when using a jigsaw, because the side you cut on ends up fairly rough, while the opposite side ends up clean & smoothe. The shelves are screwed to the shelf supports, again with countersunk screws.
I attached squares of white felt to the bottom of the legs with spray adhesive, for ease of moving the table without scratching the floor.
I primed the raw wood with oil-based Kilz to seal the knots, and painted with flat paint color-matched to the table leaf. I lightly distressed it, then finished with a couple coats of Polycrylic.
Here it is before priming/painting, upside down, which is how we actually did most of the work, except for attaching the shelves.
Next was the scary, messed up table top.
I decided decoupage was the answer to my problem. Since I used maps & globes in the room I redid, I used an old road atlas my mom gave to me for the table top. After giving the top a good sanding with a palm sander and some rough grit sandpaper, I got to work.
I used atlas pages of states where we have lived or visited - basically places that have good memories. Mod Podge and a foam brush were my friends. As you can see, I also did the leaf of the table, it was kinda messed up too.
I finished the top with five (yes, five) coats of Polycrylic in semi-gloss, because I really wanted it to be safe from whatever crafting I do on top.
It is not perfect. Look closely, and you'll see I have air bubbles and bumps. As I've said before, crafting forces me to let go of my perfectionism :) And I can really let go of it because I'm thrilled with how it turned out, new functionality plus no more ugly!
Any ideas of what to do with the pedestal I took off the bottom of the original "Liatorp" table? I'm open to suggestions!
I already had a "Liatorp" pedestal table from Ikea. It was about 8 years old, so the top was badly scratched, dinged & messed up - it stressed me out every time I looked at it because I wasn't sure how to fix the top.
A table with storage sounded good, as did keeping the round shape. I was inspired by this photo I found on Pinterest:

I guess what I did is called an Ikea hack by some. I call it a cheap way to get what I want by using what I already had. Here's the before of the room & the table...
The building of the new table was a challenge for me, my first attempt at building a real piece of furniture. My husband helped me a lot, and we finished in about 2 hours.
I used 4x4 wood for the legs, which rested almost perfectly on the box that is built under the "Liatorp" table top for holding the table leaf. The legs are cut at 34" tall to create the counter height for the new table. We attached the legs to the "Liatorp" leaf box with flat metal screw plates. Chad also routered a rounded edge onto the outside edge of each leg.
I used 2x2 wood for the shelf supports, and a countersink drill bit so the screws would be hidden below the surface once I finished it. I filled the screw holes with Plastic Wood.
I used the side pieces of the "Billy" bookcase I took apart for another project for this room redo. The side pieces were the same white shade as the "Liatorp" table, so this worked out well. I cut them to length and then cut out the corners for them to fit around the legs. I learned to cut laminated MDF boards on the bottom when using a jigsaw, because the side you cut on ends up fairly rough, while the opposite side ends up clean & smoothe. The shelves are screwed to the shelf supports, again with countersunk screws.
I attached squares of white felt to the bottom of the legs with spray adhesive, for ease of moving the table without scratching the floor.
I primed the raw wood with oil-based Kilz to seal the knots, and painted with flat paint color-matched to the table leaf. I lightly distressed it, then finished with a couple coats of Polycrylic.
Here it is before priming/painting, upside down, which is how we actually did most of the work, except for attaching the shelves.
I decided decoupage was the answer to my problem. Since I used maps & globes in the room I redid, I used an old road atlas my mom gave to me for the table top. After giving the top a good sanding with a palm sander and some rough grit sandpaper, I got to work.
I used atlas pages of states where we have lived or visited - basically places that have good memories. Mod Podge and a foam brush were my friends. As you can see, I also did the leaf of the table, it was kinda messed up too.
I finished the top with five (yes, five) coats of Polycrylic in semi-gloss, because I really wanted it to be safe from whatever crafting I do on top.
It is not perfect. Look closely, and you'll see I have air bubbles and bumps. As I've said before, crafting forces me to let go of my perfectionism :) And I can really let go of it because I'm thrilled with how it turned out, new functionality plus no more ugly!
Any ideas of what to do with the pedestal I took off the bottom of the original "Liatorp" table? I'm open to suggestions!
Sunday, July 14, 2013
School & Craft Room Makeover
When our school year wrapped up in mid-May, I decided to redo my homeschool and crafting room. I challenged myself to keep the cost way down while giving it a great look. We'll get to the cost at the end of this post.
When we moved into this house, I didn't know what I wanted this room to look like. I was busy with sewing and school so all that mattered was that we could do those things. Now that I don't have a sewing business anymore, rather, a business that is more a hodge podge of crafts and fixing up things, it didn't seem right to have a large part of the room taken up by sewing machines while not having much room to do what I needed to do.
This project rapidly grew into a huge makeover that took much longer than anticipated. I have a few finishing touches left, but I am going to share some of the project now because I am so excited to finally be just about finished!
A few of the "smaller" projects that made up the final product:
- painting the walls to match the rest of the main areas of the house
- ripping out the carpet
- staining the concrete
- taking apart an Ikea "Billy" bookcase I had, reconfiguring it with brackets as shelves mounted on the wall
- spray painting two metal filing cabinets I found on Craigslist
- using the filing cabinets to make a built-in desk along one wall with three desk stations - one for each girl on either end and one in the middle for me & my computer
- bunting made from scrapbook paper & string, hung with cup hooks from the ceiling
- redoing the pedestal table into a counter height worktable with storage (will go into more detail in my next blog post!)
Here's a close up of the computer. I purchased a wall mount for the screen to get it off the desk. I also drilled a 2" hole in the desk & slipped in a plastic cable grommet. I actually did this at all three desk stations, so we can all hide our cords.
The floor was a huge project. Huge. I couldn't have done it without my husband! We learned a LOT. It was still a better option for us than tile or wood, etc... and far less expensive.
We used Behr Concrete Floor Stain, custom mixed to get a chocolate brown color to match the wood in the rest of the house. I have mixed feelings about the results, but in the end it was an inexpensive solution that turned out decently.
Here's the completed table, which I will explain in my next blog post.
As I said, I tried to keep the cost down by using things I already had, building things ourselves, and looking for bargains.
I kept a tally of everything I had to buy (except for a few incidentals, such as nails, paintbrushes & caulk), and the grand total came to...
Just under $500. This was before I sold several items from the room that I didn't use anymore, which brought in almost $300! So the net cost of this project was just a little over $200.
When we moved into this house, I didn't know what I wanted this room to look like. I was busy with sewing and school so all that mattered was that we could do those things. Now that I don't have a sewing business anymore, rather, a business that is more a hodge podge of crafts and fixing up things, it didn't seem right to have a large part of the room taken up by sewing machines while not having much room to do what I needed to do.
This project rapidly grew into a huge makeover that took much longer than anticipated. I have a few finishing touches left, but I am going to share some of the project now because I am so excited to finally be just about finished!
A few of the "smaller" projects that made up the final product:
- painting the walls to match the rest of the main areas of the house
- ripping out the carpet
- staining the concrete
- taking apart an Ikea "Billy" bookcase I had, reconfiguring it with brackets as shelves mounted on the wall
- spray painting two metal filing cabinets I found on Craigslist
- using the filing cabinets to make a built-in desk along one wall with three desk stations - one for each girl on either end and one in the middle for me & my computer
- bunting made from scrapbook paper & string, hung with cup hooks from the ceiling
- redoing the pedestal table into a counter height worktable with storage (will go into more detail in my next blog post!)
Here's a close up of the computer. I purchased a wall mount for the screen to get it off the desk. I also drilled a 2" hole in the desk & slipped in a plastic cable grommet. I actually did this at all three desk stations, so we can all hide our cords.
The floor was a huge project. Huge. I couldn't have done it without my husband! We learned a LOT. It was still a better option for us than tile or wood, etc... and far less expensive.
We used Behr Concrete Floor Stain, custom mixed to get a chocolate brown color to match the wood in the rest of the house. I have mixed feelings about the results, but in the end it was an inexpensive solution that turned out decently.
Here's the completed table, which I will explain in my next blog post.
As I said, I tried to keep the cost down by using things I already had, building things ourselves, and looking for bargains.
I kept a tally of everything I had to buy (except for a few incidentals, such as nails, paintbrushes & caulk), and the grand total came to...
Just under $500. This was before I sold several items from the room that I didn't use anymore, which brought in almost $300! So the net cost of this project was just a little over $200.
Monday, June 3, 2013
Cream & Grey
I have been so busy with two huge projects at once -
1. Opening a new booth at an amazing antique mall in my area (yay!) I have shopped at this mall for years, it's amazing, and have wanted a booth there for some time. I've been on the waiting list, actually, since October...
2. Renovating my school/craft room. This I started before I found out a booth was available, so I was stuck with a huge mess from the room being torn apart while I got started on the stuff for the booth. More pics & a post on this later...
For the booth, I picked up a few pieces of furniture that needed some refinishing love and got to work in between the school room renovation work. Yeah, in all that spare time I have just laying around.
I used creamy ivory & light grey paints. Grey is so popular right now! I finished them up today, here are a couple pictures:
An entertainment cabinet, which could also be used for storage:
A hallway or behind-the-sofa table:
They're headed to my booth on Wednesday, along with a bunch of other things. I'll take pictures and share them once I get it all set up!
1. Opening a new booth at an amazing antique mall in my area (yay!) I have shopped at this mall for years, it's amazing, and have wanted a booth there for some time. I've been on the waiting list, actually, since October...
2. Renovating my school/craft room. This I started before I found out a booth was available, so I was stuck with a huge mess from the room being torn apart while I got started on the stuff for the booth. More pics & a post on this later...
For the booth, I picked up a few pieces of furniture that needed some refinishing love and got to work in between the school room renovation work. Yeah, in all that spare time I have just laying around.
I used creamy ivory & light grey paints. Grey is so popular right now! I finished them up today, here are a couple pictures:
An entertainment cabinet, which could also be used for storage:
A hallway or behind-the-sofa table:
They're headed to my booth on Wednesday, along with a bunch of other things. I'll take pictures and share them once I get it all set up!
Thursday, May 16, 2013
DIY: polo shirt --> halter top
The piece in question for this tutorial was a red polo shirt embroidered with the choir logo, which I recycled into a summery halter top.
The bottom edges were basically equal in length, so I didn't have to alter the hemline.

Here's a closer shot to see the cutting lines. I cut more sparingly at first, and then tweaked it until it looked about right.
8. Finish by sewing closed 30-36" length of 12" double fold bias tape & thrad through the top edge casing. I happened to have red bias tape with white polka dots, which added a cute touch.

I did a similar upcycle with a pink strawberry long sleeved top. It had holes in the arms, so I cut those off & turned the fabric from the arms into finger-formed ruffles for the chest embellishment.

You could do this top in any size, adult or infant or anything in between.
Obviously, the bias tape length would need to be adjusted for the size.

Wednesday, April 24, 2013
Hot Shredded Wheat
I grew up eating hot shredded wheat on cold days. For me, it is a comfort food because it is a taste of my childhood, as well as my beloved grandfather who passed the idea on to my mom and then to me.
Wheat gets a bad rap these days, but I tend to be more middle of the road about it. We eat it whole (not white) and interspersed through our diet with a variety of other grains (oats, rice, quinoa, etc.) We don't have digestive issues that require avoiding it, so I consider small amounts healthy.
And while you see a tiny bit of butter & sugar on this, you'll also notice the larger amounts of almonds & apples. You can add berries, other nuts, whatever suits your fancy. My daughter loves this one, too.
Hot Shredded Wheat Bowl
Press 1 large Shredded Wheat biscuit into a bowl, crushing it.
Pour 1/4 c. vanilla almond milk over the biscuit.
Spread 1 tsp. butter or Smart Balance on top of the biscuit.
Sprinkle on 1 tsp. dark brown sugar, 1 Tbsp. chopped almonds, 2-3 Tbsp. chopped apples.
Put the bowl in the microwave for 30 seconds to 1 minute on 80% power.
You know it's done when it's steaming and the biscuit is soft & collapsed.
When made with Smart Balance, this is a 200 calorie bowl.
Wheat gets a bad rap these days, but I tend to be more middle of the road about it. We eat it whole (not white) and interspersed through our diet with a variety of other grains (oats, rice, quinoa, etc.) We don't have digestive issues that require avoiding it, so I consider small amounts healthy.
And while you see a tiny bit of butter & sugar on this, you'll also notice the larger amounts of almonds & apples. You can add berries, other nuts, whatever suits your fancy. My daughter loves this one, too.
Hot Shredded Wheat Bowl
Press 1 large Shredded Wheat biscuit into a bowl, crushing it.
Pour 1/4 c. vanilla almond milk over the biscuit.
Spread 1 tsp. butter or Smart Balance on top of the biscuit.
Sprinkle on 1 tsp. dark brown sugar, 1 Tbsp. chopped almonds, 2-3 Tbsp. chopped apples.
Put the bowl in the microwave for 30 seconds to 1 minute on 80% power.
You know it's done when it's steaming and the biscuit is soft & collapsed.
When made with Smart Balance, this is a 200 calorie bowl.
Monday, April 22, 2013
Yogurt Parfait
I met a friend at a coffeehouse recently when I happened to be hungry, but didn't want to blow it with a big carb load, i.e., muffin. I picked out a yogurt parfait, which is not usually my thing, but to my surprise I enjoyed it!
Of course, being my mother's daughter, I thought, "I could totally make this!"
Yogurt Parfait
2/3 c. vanilla Greek yogurt (I used Oikos)
1/4 c. mixed frozen berries
2 Tbsp. granola (I used Quaker)
Layer in a cup.
I like to stir it up and let it sit for just a bit so the granola softens & berries thaw.
If you want to make a few at one time to be prepared for the munchies later in the week, use 1 c. volume containers with lids (as you can see, I did this at the same time, too).
One parfait is 200 calories.
Of course, being my mother's daughter, I thought, "I could totally make this!"
Yogurt Parfait
2/3 c. vanilla Greek yogurt (I used Oikos)
1/4 c. mixed frozen berries
2 Tbsp. granola (I used Quaker)
Layer in a cup.
I like to stir it up and let it sit for just a bit so the granola softens & berries thaw.
If you want to make a few at one time to be prepared for the munchies later in the week, use 1 c. volume containers with lids (as you can see, I did this at the same time, too).
One parfait is 200 calories.
Friday, April 12, 2013
Making it healthier
I have a recipe for a delicious egg bake that I adore, but it is full of butter and cheese. The fat content plus the quantity that's large enough for a crowd makes it unsuited for every day breakfast.
So I came up with my own one-serving version.
Saute 1 Tbsp. finely chopped onion & 1 Tbsp. finely chopped red pepper in a skillet sprayed with nonstick spray over medium heat.
Mix 1 egg with 2 Tbsp. lowfat cottage cheese. Reduce heat to medium/low, pour the egg mixture in over the red peppers & onion. Roll pan to spread egg out into a circle. Cooking too hot will burn the cheese.
When the omelette is about half-set, sprinkle with 1 Tbsp. shredded cheddar cheese and use a spatula to fold in half.
Cook until fully set.
With the ingredients I used, this is 175 calories and tastes so much like the other egg bake that I may not ever need that old recipe again.
So I came up with my own one-serving version.
Saute 1 Tbsp. finely chopped onion & 1 Tbsp. finely chopped red pepper in a skillet sprayed with nonstick spray over medium heat.
Mix 1 egg with 2 Tbsp. lowfat cottage cheese. Reduce heat to medium/low, pour the egg mixture in over the red peppers & onion. Roll pan to spread egg out into a circle. Cooking too hot will burn the cheese.
When the omelette is about half-set, sprinkle with 1 Tbsp. shredded cheddar cheese and use a spatula to fold in half.
Cook until fully set.
With the ingredients I used, this is 175 calories and tastes so much like the other egg bake that I may not ever need that old recipe again.
Wednesday, March 27, 2013
My little kitchen helper
Jelly jar + baking soda + circle of lace fabric + lid ring or rubber band =
Pretty enough to keep by your sink, packs a powerful punch!
The baking soda will dispense, shaker style, out through the lace.
Baking soda is a fabulous, inexpensive, natural kitchen helper:
- absorbs oil on greasy dishes
- makes a paste to help scrub gunk away
- as a soft scrubbing powder, it will make your sink shine
- if you used baking stoneware or cast iron cookware, baking soda is a perfect alternative to cleaning since you shouldn't use soap on these surfaces
- absorbs odors just while it's sitting there!
Pretty enough to keep by your sink, packs a powerful punch!
The baking soda will dispense, shaker style, out through the lace.
Baking soda is a fabulous, inexpensive, natural kitchen helper:
- absorbs oil on greasy dishes
- makes a paste to help scrub gunk away
- as a soft scrubbing powder, it will make your sink shine
- if you used baking stoneware or cast iron cookware, baking soda is a perfect alternative to cleaning since you shouldn't use soap on these surfaces
- absorbs odors just while it's sitting there!
Monday, March 25, 2013
Resurrection Mantle
I finished my Resurrection/Easter mantle decorating today. I did a quick and easy bunting project that added just the right finishing touch, and I'm very pleased with how it all turned out.
Here's a quick rundown on the bunting craft...
Supplies:
- muslin or other basic solid fabric
- jute cord
- black craft paint (I actually used leftover chalkboard paint!)
- printout of the letters H, E, I, S, R & N, in a font you like (I used Lemon Chicken sized at 175 in MSWord)
Tear the muslin into a couple of 6" wide strips, then tear those into 4" wide pieces, to get 9 total flags. I wanted the rough look, but if you want a clean look for whatever fabric you are using, cut nine 6x4" rectangles.
Iron the flags and sew or glue down (with fabric glue) a 1/2" casing at the top of each one.
Cut out the letters from the paper they are printed on to make stencils. I did have to cut in from the sides on some of them to reach the odd angles, so I just taped the outlines back together.
Center each stencil on the flag, and gently paint with the black paint. I used a Q-tip as my paintbrush, it allowed me to tap gently and get the soft, mottled look I wanted. It's better to start light, then add more to build the color until you like the amount, instead of doing too much and having it leak or make dark blobs.
Put a safety pin on one end of the jute (measured & cut to fit the space where you want to hang). Use the safety pin to push the jute through the flags in order.
Hang, adjust the spacing of the flags, done!
I am deeply thankful for the reminder I need and receive every year on Resurrection weekend, of God's faithfulness, Jesus' sacrifice, and the Spirit's renewal.
Tutorial for the crown of thorns is here, and the empty tomb tutorial is here.
Here's a quick rundown on the bunting craft...
Supplies:
- muslin or other basic solid fabric
- jute cord
- black craft paint (I actually used leftover chalkboard paint!)
- printout of the letters H, E, I, S, R & N, in a font you like (I used Lemon Chicken sized at 175 in MSWord)
Tear the muslin into a couple of 6" wide strips, then tear those into 4" wide pieces, to get 9 total flags. I wanted the rough look, but if you want a clean look for whatever fabric you are using, cut nine 6x4" rectangles.
Iron the flags and sew or glue down (with fabric glue) a 1/2" casing at the top of each one.
Cut out the letters from the paper they are printed on to make stencils. I did have to cut in from the sides on some of them to reach the odd angles, so I just taped the outlines back together.
Center each stencil on the flag, and gently paint with the black paint. I used a Q-tip as my paintbrush, it allowed me to tap gently and get the soft, mottled look I wanted. It's better to start light, then add more to build the color until you like the amount, instead of doing too much and having it leak or make dark blobs.
Put a safety pin on one end of the jute (measured & cut to fit the space where you want to hang). Use the safety pin to push the jute through the flags in order.
Hang, adjust the spacing of the flags, done!
I am deeply thankful for the reminder I need and receive every year on Resurrection weekend, of God's faithfulness, Jesus' sacrifice, and the Spirit's renewal.
Tutorial for the crown of thorns is here, and the empty tomb tutorial is here.
Sunday, March 24, 2013
Friday, March 15, 2013
The Empty Tomb - a craft tutorial
In a post last week, I mentioned that I have been working on a Resurrection theme mantle display. One item I really wanted was an empty tomb.
Turns out, empty tombs sculputres aren't really made. Not that I could find, anyway. Hmmm.
I decided to take matters into my own hands. I googled for pictures of the real thing, as well as some plaster molding directions, then headed to the kitchen armed with some plaster of Paris to see what I could come up with.
This project was not very difficult, but required me to put aside my perfectionistic tendencies, because it is not an exact science. If you decide to make this, I'm sure you'll find a better way to do some of these steps... in fact, if you do, come back & leave a comment to help out your fellow crafters.
The first thing I need to stress is that plaster of Paris cannot, repeat cannot, be rinsed down the drain. It will solidify down there and create a cement-like clog. So please, please, please use disposable products for working with the plaster, and paper towels to clean up. Dampened paper towels work very well to remove plaster from hands and tools, and then you can throw the towels out without sending anything down the drain.
Supplies:
- dry Plaster of Paris for mixing
- a container you can throw away for mixing the plaster (empty milk jug with the top cut off, anyone?)
- a paint stirring stick from the hardware store, or another tool that can be thrown away
- a small cardboard/paperboard box for creating a mold your tomb (I used the box from a Swiffer Dusters starter kit, 7.5" x 5" x 2.5")
- a very small box for the "empty tomb" opening (I used a 1 3/4" box that 4 batteries came in)
- a small plastic circular container for a mold for the stone - the goal is to find something that has fairly straight sides & a flat bottom, that will result in a stone that can cover the "empty tomb" opening created by the very small box (I used a Ziploc 1 cup storage container - you could use a tuna can, the bottom of a plastic drink bottle, etc.)
- tape
- aluminum foil
- black paint (poster, chalkboard, latex - something water based) - brown paint (again, water based - I used kids' watercolor paint... yes, really!)
- a clear sealer, I used Varathane polyurethane in matte, because I wanted both a water-based product and a matte finish (there weren't any shiny rocks on that hillside!)
- knife
- small paintbrush
- paper towels
Step One: Building the mold for the tomb and stone
Cut the side or top off of the box to be used for the tomb mold (shown in the photo above supplies list). Use tape to position the very small box where you want it, to be the form for the tomb opening (shown in the above photo).
Using a large piece of foil, line the inside of the tomb mold. I formed the foil over the very small box first, then worked outward to the edges of the larger box. You must be very careful not to puncture or tear the foil as you work it around the very small box, or you'll end up with plaster leaking through the tears.
I did not smooth out the foil too much - this is what creates the natural variations in the casting that look like real stone.
Notice that at the corners of what will be the top side of the tomb, I did not work the foil into the corners, but left it rounded.
Fold the excess foil to the outside of the box, to get it out of your way.
Next, form another piece of foil to the inside of the round container, to make the mold for the stone.
Whew, that was probably the hardest part (and it wasn't too hard, was it?)
Step Two: Casting the plaster figures
Using some sort of large container that is disposable, mix 2 parts plaster of Paris to 1 part cool water. I did 1 c. water, 2 c. plaster. Stir gently with the wood paint stick, don't mix vigorously or you'll end up with lots of bubbles that can show up in your final casting.
Next, add some black paint to the plaster mix, to get it good and grey. I mixed in paint three times before I got it dark enough for my tastes. You could add brown instead, to get a more earthy looking rock color.
Now it's time to pour! I poured plaster into the tomb stone mold first, to be about 1/2-3/4" thick. Then I poured the rest into the tomb mold.
Gently tap the molds on the counter or table top you are using to encourage any tiny air bubbles to rise to the surface and pop.
Now you get to let it cure. Overnight is best, to be sure it is good and dry.
Remember to clean up with damp paper towels, no rinsing anything down the drain.
Tick-tock tick-tock tick-tock ding! It's tomorrow, time for the next step!
Step Three: Unmold and smooth
Here is the exhilarating, terrifying moment when you turn the plaster pieces upside down on your hand, remove the box/container with the other hand, then peel the foil off...
Put both figures on a cutting board that you can clean with damp paper towels later. Using a knife, start smoothing the outer edges of the tomb figure, cutting away any jagged places that became too shaped by the foil. Don't be afraid to really go at it. I didn't want a very crinkly look on the sides, so I kept shaving plaster away.
For the tomb stone, notice in the picture above that I basically carved away all of the rough edges all the way around, to recreate a stone that could be rolled. I also flattened out an area to create a side that it would rest on for display without rolling around.
Throw all of your shavings away, wipe the knife and carving area off with damp paper towels.
Step Four: Paint
This part is completely up to your preference for how you want your finished tomb to look. If you prefer more brown for your paint, use brown instead of black for the main stone area.
I started with black and painted the inside of the tomb opening. I was having fun, so I kept going and added paint to some of the larger crinkle-cracks (as I like to call them). I rubbed the paint around with a dampened paper towel to work it in and remove the excess. If you do this, only work in a small section at a time, because the paint absorbs quickly into the plaster.
Just keep working on it until you like how it looks. I probably removed more paint with the paper towels than what actually stayed on, I didn't want it too dark.
Repeat this on the tomb stone face. However, I did not put any paint on the smoothed, round sides of the stone, for a more realistic, carved-stone look.
Next, I applied a wash of the brown watercolor paint. I actually did the small cracks more heavily, to enhance the natural stone look some more. This paint also absorbs easily, so keep an eye on how you apply it, don't go too heavy until you're ready.
I let the whole thing dry overnight, and then I did the final step,
Step Five: Sealing
I laid my figures on another sheet of foil before I did this, to catch the drips. A plastic mat or something would work well, too.
Brush on several coats of sealer. Be sure to seal the side that the figures will stand on, to keep plaster from sticking to its resting place. I went ahead and sealed the entire thing, front, back, and all around.
Water-based is great, because you can rinse the brush off easily, and clean up is a snap.
Let the sealer cure at least overnight.
Give or take 24 hours later, you're done!
Keep in mind that a plaster casting is still somewhat soft, meaning this is not hard as a rock. It should be protected in storage from bumps and pressure, and probably will not hold up well if played with. Did you try this tutorial? I'd love to hear how it went for you!
Turns out, empty tombs sculputres aren't really made. Not that I could find, anyway. Hmmm.
I decided to take matters into my own hands. I googled for pictures of the real thing, as well as some plaster molding directions, then headed to the kitchen armed with some plaster of Paris to see what I could come up with.
This project was not very difficult, but required me to put aside my perfectionistic tendencies, because it is not an exact science. If you decide to make this, I'm sure you'll find a better way to do some of these steps... in fact, if you do, come back & leave a comment to help out your fellow crafters.
The first thing I need to stress is that plaster of Paris cannot, repeat cannot, be rinsed down the drain. It will solidify down there and create a cement-like clog. So please, please, please use disposable products for working with the plaster, and paper towels to clean up. Dampened paper towels work very well to remove plaster from hands and tools, and then you can throw the towels out without sending anything down the drain.
Supplies:
- dry Plaster of Paris for mixing
- a container you can throw away for mixing the plaster (empty milk jug with the top cut off, anyone?)
- a paint stirring stick from the hardware store, or another tool that can be thrown away
- a small cardboard/paperboard box for creating a mold your tomb (I used the box from a Swiffer Dusters starter kit, 7.5" x 5" x 2.5")
- a very small box for the "empty tomb" opening (I used a 1 3/4" box that 4 batteries came in)
- a small plastic circular container for a mold for the stone - the goal is to find something that has fairly straight sides & a flat bottom, that will result in a stone that can cover the "empty tomb" opening created by the very small box (I used a Ziploc 1 cup storage container - you could use a tuna can, the bottom of a plastic drink bottle, etc.)
- tape
- aluminum foil
- black paint (poster, chalkboard, latex - something water based) - brown paint (again, water based - I used kids' watercolor paint... yes, really!)
- a clear sealer, I used Varathane polyurethane in matte, because I wanted both a water-based product and a matte finish (there weren't any shiny rocks on that hillside!)
- knife
- small paintbrush
- paper towels
Step One: Building the mold for the tomb and stone
Cut the side or top off of the box to be used for the tomb mold (shown in the photo above supplies list). Use tape to position the very small box where you want it, to be the form for the tomb opening (shown in the above photo).
Using a large piece of foil, line the inside of the tomb mold. I formed the foil over the very small box first, then worked outward to the edges of the larger box. You must be very careful not to puncture or tear the foil as you work it around the very small box, or you'll end up with plaster leaking through the tears.
I did not smooth out the foil too much - this is what creates the natural variations in the casting that look like real stone.
Notice that at the corners of what will be the top side of the tomb, I did not work the foil into the corners, but left it rounded.
Fold the excess foil to the outside of the box, to get it out of your way.
Next, form another piece of foil to the inside of the round container, to make the mold for the stone.
Whew, that was probably the hardest part (and it wasn't too hard, was it?)
Step Two: Casting the plaster figures
Using some sort of large container that is disposable, mix 2 parts plaster of Paris to 1 part cool water. I did 1 c. water, 2 c. plaster. Stir gently with the wood paint stick, don't mix vigorously or you'll end up with lots of bubbles that can show up in your final casting.
Next, add some black paint to the plaster mix, to get it good and grey. I mixed in paint three times before I got it dark enough for my tastes. You could add brown instead, to get a more earthy looking rock color.
Now it's time to pour! I poured plaster into the tomb stone mold first, to be about 1/2-3/4" thick. Then I poured the rest into the tomb mold.
Gently tap the molds on the counter or table top you are using to encourage any tiny air bubbles to rise to the surface and pop.
Now you get to let it cure. Overnight is best, to be sure it is good and dry.
Remember to clean up with damp paper towels, no rinsing anything down the drain.
Tick-tock tick-tock tick-tock ding! It's tomorrow, time for the next step!
Step Three: Unmold and smooth
Here is the exhilarating, terrifying moment when you turn the plaster pieces upside down on your hand, remove the box/container with the other hand, then peel the foil off...
Put both figures on a cutting board that you can clean with damp paper towels later. Using a knife, start smoothing the outer edges of the tomb figure, cutting away any jagged places that became too shaped by the foil. Don't be afraid to really go at it. I didn't want a very crinkly look on the sides, so I kept shaving plaster away.
For the tomb stone, notice in the picture above that I basically carved away all of the rough edges all the way around, to recreate a stone that could be rolled. I also flattened out an area to create a side that it would rest on for display without rolling around.
Throw all of your shavings away, wipe the knife and carving area off with damp paper towels.
Step Four: Paint
This part is completely up to your preference for how you want your finished tomb to look. If you prefer more brown for your paint, use brown instead of black for the main stone area.
I started with black and painted the inside of the tomb opening. I was having fun, so I kept going and added paint to some of the larger crinkle-cracks (as I like to call them). I rubbed the paint around with a dampened paper towel to work it in and remove the excess. If you do this, only work in a small section at a time, because the paint absorbs quickly into the plaster.
Just keep working on it until you like how it looks. I probably removed more paint with the paper towels than what actually stayed on, I didn't want it too dark.
Repeat this on the tomb stone face. However, I did not put any paint on the smoothed, round sides of the stone, for a more realistic, carved-stone look.
Next, I applied a wash of the brown watercolor paint. I actually did the small cracks more heavily, to enhance the natural stone look some more. This paint also absorbs easily, so keep an eye on how you apply it, don't go too heavy until you're ready.
I let the whole thing dry overnight, and then I did the final step,
Step Five: Sealing
I laid my figures on another sheet of foil before I did this, to catch the drips. A plastic mat or something would work well, too.
Brush on several coats of sealer. Be sure to seal the side that the figures will stand on, to keep plaster from sticking to its resting place. I went ahead and sealed the entire thing, front, back, and all around.
Water-based is great, because you can rinse the brush off easily, and clean up is a snap.
Let the sealer cure at least overnight.
Give or take 24 hours later, you're done!
Keep in mind that a plaster casting is still somewhat soft, meaning this is not hard as a rock. It should be protected in storage from bumps and pressure, and probably will not hold up well if played with. Did you try this tutorial? I'd love to hear how it went for you!
Subscribe to:
Posts (Atom)


















